Eleaf iStick Pico 21700 with ELLO, the newest release from Eleaf iStick Pico family, is requires 21700 battery as well as 18650 battery (with sleeves). It can provide a max 100W / 2A output for a long-time vaping. Eleaf ELLO atomizer is a retractable top fill and extendable tank that introduces a new HW1-C coil. The new coil features a ceramic wick system for heat preservation, Eeaf HW1-C coil can offer the best vaping experience.
Size: 51mm*26mm*119mm (after extended)
Weight: 150.4g (after extended, without battery)
E-liquid capacity: 2ml (extendable to 4ml)
Battery type: 21700/18650
Maximum charging current: 2A
Thread type: 510 thread
Output wattage: 1-100W
Output voltage: 0.5-9V
Output mode: VW/Bypass/TC(Ni/Ti/SS/TCR)
Resistance range: 0.05-1.5ohm (TC modes)
0.1-3.5ohm (VW/Bypass mode)
Colors: greenery, black, hot pink, grey, brushed silver, silver
1 × iStick Pico 21700 (without batteries)
1 × ELLO Atomizer
1 * AVB 21700 Battery
1 × HW2 Dual-Cylinder 0.3ohm Head (pre-installed)
1 × HW1-C Single-Cylinder 0.25ohm Head
1 × QC USB Cable
2 × User Manuals
The iStick Pico 21700 uses 21700 battery as well as 18650 battery and provides a high drain Avatar AVB 21700 battery for your option.
The iStick Pico 21700 provides two packages for your option: one with a high drain 4000mAh 21700 battery and the other without it.
As the newest addition to Eleaf iStick Pico family, the iStick Pico 21700 retains the compact and ergonomic shape of iStick Pico series, which is very comfortable to hold and carry.
The iStick Pico 21700 is capable of running up to 100W, making your vaping limitless. And its large 0.91 inch OLED screen clearly displays all essential information.
Featuring a ceramic wrapped wick system for heat preservation, this HW1-C coil can provide a great and efficient vaping experience with enhanced taste. The iStick Pico 21700 with ELLO also includes a HW2 coil for your preference.
Note: All the data above were based on the tests by Eleaf factory. Only for your reference.
To fill the ELLO tank, you just slide the drip tip back and it reveals the fill port, which is quite easy to use and works very well.
The ELLO provides two drip tips for you, one with a tapered elegant shape and the other with a wider bore for more airflow and flavorful taste.
All parts of the ELLO tank can be detached and reassembled, allowing great convenience to clean them. Also the tank is extendable to obtain a larger e-liquid capacity of 4ml when using the taller glass tube.
The iStick Pico 21700 can handle various tanks up to 25mm diameter without any overhang.
With 2A maximum charging current, the battery can be fully charged much more quickly.
The circuit protection system has both software and hardware battery protections of over-charging, over-current and over-discharging.
Reverse polarity protection is fully achieved by the application of special battery anti reverse circuit in the circuit board.
Charging: the 21700/18650 battery can be charged in the iStick Pico 21700 through the side USB port via wall adapter or computer or charged with an external battery charger.
The firmware can be upgraded by connecting the device with a computer through the USB port via a micro USB cable.
Download the file below to put custom logo into your iStick Pico 21700.