Eleaf iStick Pico 25 with ELLO Sub-Ohm Kit offers a large 0.91 inch OLED display and concise interface, featuring a 2A quick charge capability and upgradeable firmware with the latest preheat function. Equipped with single replaceable 18650 battery, Eleaf iStick Pico 25 Mod can power up to max 85W. Eleaf ELLO atomizer utilizes the new HW coils for ultimate flavor and features a convenient top fill system with 2ml e-liquid capacity which can hold up to 4ml with expansion glass.
E-liquid capacity: 2ml
Output wattage: 1-85W
Maximum charging current: 2A
Maximum output current: 50A
Thread type: 510 thread
Battery type: high-rate 18650 battery
(Continuous discharge current should be above 25A)
Output mode: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
Resistance range: 0.05-1.5ohm (TC modes)
0.1-3.5ohm (VW mode)
1 × iStick Pico 25 (without battery)
1 ×ELLO Atomizer
1 × HW1 Single-Cylinder 0.2ohm Head
1 × HW2 Dual-Cylinder 0.3ohm Head
1 × QC USB Cable
2 × User Manuals
With a compact size, the iStick Pico 25 with ELLO is very comfortable to hold and carry. Powered by single 18650 battery, it is capable of outputting a maximum power of 85W.
The iStick Pico 25 features a big 0.91-inch screen that offers concise and clear interfaces. And there are three switchable interfaces for you to choose the one you’re most accustomed to.
The iStick Pico 25 can handle various tanks up to 25mm diameter.
With a maximum charging current of 2A, the battery in the iStick Pico 25 can be fully charged much more quickly.
The iStick Pico 25 is powered by a single 18650 battery, allowing to always carry spare batteries with you.
The iStick Pico 25 comes with the HW coils: HW1 Single-Cylinder 0.2ohm Head and HW2 Dual-Cylinder 0.3ohm Head, providing you with different vaping experience.
Note: All the data above was based on the tests by Eleaf factory. Only for your reference.
To fill the ELLO tank, you just slide the drip tip back and it reveals the fill port, which is quite easy to use and works very well.
All parts of the ELLO tank can be detached and reassembled, allowing great convenience to clean them.
Preheat function allows the device to quickly heat up the coil at a higher wattage, providing you with a nice vaping experience. And the firmware is upgradeable to be always the latest.
The circuit protection system has both software and hardware battery protections of over-charging, over-current and over-discharging.
Charging: the 18650 battery can be charged in the iStick Pico 25 through the side USB port via wall adapter or computer or charged with an external battery charger.
The firmware can be upgraded by connecting the device with a computer through the USB port via a micro USB cable.
Download the file below to put custom logo into your iStick Pico 25.